Home » Apps » Art & Design » Simple DIY Regulation Cornhole Set
Simple DIY Regulation Cornhole Set APK icon

Simple DIY Regulation Cornhole Set APK

6.1 for Android

Albedo Studio

Simple DIY Regulation Cornhole Set Screenshot

The description of

Simple DIY Regulation Cornhole Set 6.1 APK

This bean-bag toss game is fun and easy for the whole family. Building a set is a fairly easy woodworking project, and since it's made from exterior wood, it will last for years.


   jig saw
   measuring Tape


   (2) 24" x 48" pieces of 1/2" pressure-treated plywood for the surface
   (4) 2x4 x 48" for the frame
   (4) 2x4 x 21" for the frame


Game Time

You requires platforms be a 48" x 24" rectangle made from 1/2-inch plywood. The front of the platform stands 2-1/2 to 4 inches tall and the back of the platform sits 12 inches off the ground. The plans for this project follow those requirements.

Regulation corn bags need to be 6-inches square, made from duck canvas and be filled with two cups of corn feed. A set of eight can be purchased online for $25 to $30. You can also purchase corn bags made with a plastic filling; these are less expensive than the corn-filled bags and are weatherproof. Corn-filled bags can easily get ruined if left in the rain.

1. Project Cut List and Plans

You will need two 24" x 48" sections of 1/2" plywood; four 2x4 x 48" for the frame; four 2x4 x 21" for the frame; and four 2x4 x 11-1/2" for the legs.

2. Construct the Platform Box

Cut the plywood into two 2’ x 4’ sections. Cut the 2x4s to the length specified in the cut list for the frame. Fasten the 2x4s into a box with the 21-inch pieces inside the 48-inch pieces to form a 2’ x 4’ box. Lay the plywood on top of the box, use the plywood to square up the 2x4 frame. Fasten the plywood onto the frame with 1-5/8” screws. Repeat for the second platform box.

3.  Cut Legs and Fit

Cut a 2x4 to 11-1/2” for the four legs. Make a full 3-1/2" radius cut on one end of each leg. To make the cut, measure 1-3/4" down the length of the 2x4 and draw a line across it. Place a compass point centered on that line then draw the arc. Use a jig saw to make the cut.

Turn the box upside down; lay a leg parallel, flush up against one of the top corners with the radius side in the corner. Clamp into place.

From the inside of the box, make a mark in the center of the 2x4 vertically inside the radius. Drill a 1/2" hole through the side of the box and through the support leg.

4. Attach Legs

Install the carriage bolt through both holes and attach with a washer and a wing nut. Check for operation; see if the legs can fold up and down inside of the platform. You may have to adjust the radius top if it is contacting anywhere, use a sander to do this. Repeat the process for the other legs.

5. Cut the Leg Ends

To cut the angle on bottom of the leg, turn the box right-side up and set it on a worktable with the legs tucked under. Place a block (or anything that will hold it up, we used a bucket) under the box so that the back of the platform is 12 inches off the tabletop. Slide the box to the edge of the table, pull down the leg closest to the edge so that it hangs just over the table edge. Using the tabletop as a guide, draw a straight line across the bottom of the 2x4. Repeat for the opposite side. Cut the ends off using a circular saw.

Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.

Download Simple DIY Regulation Cornhole Set APK v6.1. Heres A Application Dedicated To Simple DIY Regulation Cornhole Set. Simple DIY Regulation Cornhole Set is posted in Art & Design category and is developed by Albedo Studio.
The average rating is 0 out of 5 stars on our website. You may also leave your review for Simple DIY Regulation Cornhole Set on our website so that our users may have a good idea about the app. If you want to know more about Simple DIY Regulation Cornhole Set then you may visit Albedo Studio support center for more information. Average rating of 0 is calculated by taking account of ratings by 0 users.

The app was rated:

This app is downloaded minimum 5 times but the number of downloads might be as high as 10. Download Simple DIY Regulation Cornhole Set APK if you need a free app from the Art & Design category for your device but you will need Android 4.0 and up version or higher to install this app.
This app was posted on Oct 15, 2017 and is available since then on MI9.COM . The current version is 6.1 and is now downloaded more than 10 times from our platform. Download APK and open it using your favorite File manager and install by tapping on the file name.
If the installation does not start then you need to enable unknown sources from your Android settings. Some apps like: Designs1 Beta, Commands and Tools for Termux, Cornhole Score Keeper .

What's New
No 1 App For Simple DIY Regulation Cornhole Set  in <b>Play Store</b>
Feature List:
✓ Amazing 300+ Simple DIY Regulation Cornhole Set  with step by step.
✓ Lots of perfect 300+ Simple DIY Regulation Cornhole Set  in HD Quality.
✓ You can share all tutorial to social media and other
✓ You can add Simple DIY Regulation Cornhole Set  into favorite list
✓ Zoom in, zoom out for all tutorial.
✓ Application easy to use, works offline. No need to download content.

Category: Art & Design , Similar

Date published: Oct 15, 2017

Current version: 6.1

Get it on: Get Simple DIY Regulation Cornhole Set for Free on Google Play

Requires android: 4.0 and up

Content rating: Rated for 3+




0 total
5 0
4 0
3 0
2 0
1 0